How to Use Bitmain Antminer L3+ (600Mh) on Mining Pools: 2023 Guide

Use of the Bitmaian Antminer L3+ (600Mh) on mining pools is covered in this article.

The Bitmain Antminer L3+ (600Mh) is a Dogecoin and Litecoin merge miner (it can mine both coins at the same time), which belongs to Antminer L3 Series. It mines the Scrypt algorithm, with a maximum hashrate of 600 Mh/s and a power consumption of 850 W.

At an electricity cost of 8¢ /kwH, the Bitmain Antminer L3+ (600Mh) profitability is $0.15 every 24 hours. This equates to 13.68 DOGE and 0.0064 LTC mined every 24 hours.

Learn how to use your Bitmain Antminer L3+ (600Mh) on mining pools by reading this article. We’ll use the Nicehash pool as an illustration here.

What is the Most Popular Coin to Mine With Antminer L3+ (600Mh)?

Antminer L3+ (600MH/s) ASIC. BitMain sells the Antminer L3+, a Scrypt mining device. It is able to mine Litecoin (LTC) with a maximum hashrate of 504,000,000H for a power consumption of 800W.

How to Use Bitmain Antminer L3+ (600Mh)on Mining Pools

Just follow these easy steps to configure your Bitmain Antminer L3+ (600Mh) and mining pool account:

Connecting the Power Supply

Nine PCI-e connectors are located at the top of the AntMiner L3+ for connecting the PSU as follows:

• The hash boards require eight PCI-e connectors. A pair of two PCI-e connectors are present on each hash board.
• There is only one PCI-e connector on the controller.

To avoid potential damage and instability, each hashboard needs to be powered by the same PSU on both connectors.

To connect the power supply:

1. Make sure that each of the AntMiner L3+’s eight PCI-e connectors is connected to a PSU power cable connector to ensure that each hash board is powered by the same PSU.
2. The AntMiner L3+ PCI-e connector on the controller should be connected to a power supply cable connector.
3. The ETH port should be connected with a network cable.
4. Connect the PSUs to the power wall outlet to start the AntMiner L3+.

If you are using more than one PSU, turn on the PSU connected to the controller AFTER you have turned on the other PSU(s).

Setting Up the Bitmain Antminer L3+ (600Mh) for Mining

The web interface for the miner will now be set up.

To find the IP address of the AntMiner L3+ (600Mh), log in to your router’s web interface. The miner should be labeled AntMiner in your router interface.

Connect to the web interface

1. Open up the web browser of your choice (such as Chrome, Firefox, etc.) and IP address provided.
2. It will ask you to enter a username and password. By default, the AntMiner credentials are root for both, the username and password. Immediately alter the password.

Installing Latest Firmware

After connecting to the web interface, a summary of your miner’s data should appear. The most recent version of the miner firmware, which can be found on the official Bitmain website, must then be installed.
Download the latest firmware

Follow this link to download the latest and old firmware for AntMiner L3+ (600Mh)

Install the latest firmware on your AntMiner L3+ (600Mh)

1. Select the System tab and move over to the Upgrade child tab.
2. This page shows Restore functionalities and Flash new firmware image.

Your miner has now been configured and is secure. Discover how to set it up so that it can connect to a mining pool by reading the following section.

Connect Bitmain Antminer L3+ (600Mh) to a Mining Pool

You can now use the miner to join a mining pool after successfully updating the firmware to the most recent version.

Go to https://www.nicehash.com/asic-mining in a new tab of your browser. Click Generate Stratum after choosing your ASICs algorithm.

Copy stratum server, in this case use stratum+tcp://x11.auto.nicehash.com:9200 or stratum+ssl://x11.auto.nicehash.com:443 (if ssl is supported). You must enter it into the URL text box on Step 4 of the Miner Configuration tab.

Your Nicehash mining address or another BTC wallet address should be entered in the text box for the worker. You can use it like this: MiningAddress.WorkerName to name your worker.

Password should always be “x”.

Click Save&Apply.

Note that #xnsub should be used at the end of the stratum line in the URL text field (stratum+tcp://scrypt.auto.nicehash.com:9200#xnsub) because some ASICs support it.

The abbreviation Xnsub stands for extra-nonce subscription. A miner may be able to completely exhaust the nonce-space (the value that is altered for each hash in an effort to find the valid hash) for algorithms with extremely high difficulties and for miners with extremely high hash rates.

Extranonce was developed to give miners the ability to modify a small field in the coinbase and rehash a slightly different block.

By subscribing, you inform NH (or any pool that supports it) that despite the fact that you’ve already sent a specific nonce, the block in question is actually different due to this extranonce field. The nonce is essentially expanded.

Monitor and Use Bitmain Antminer

Being able to monitor the Bitmain Antminer L3 miner is just as important as understanding how to use it on mining pools.
In terms of monitoring, the AntMiner web interface comes with easy tooling such as the Kernel Log and Monitor tabs.
Another useful monitoring page is the Monitor status page which shows information on your miner’s status:

On this screen, you can see information about current hashrate, Uptime and current scoring rate.
On the bottom of the screen, you can see information about the speed of fans.

How to Choose a Cryptocurrency Mining Pool

If you’re interested in mining cryptocurrencies and have decided to give it a shot, you might want to think about signing up for a mining pool where your chances of getting paid for your work are higher. However, selecting a mining pool can be challenging because there are so many options and factors to take into account.

Learn how to choose a mining pool as well as the factors you should take into account.

KEY TAKEAWAYS

• You might need to make a costly equipment purchase if you want to join a mining pool.
• The operations of mining pools must be fair and transparent.
• Plans for fees and payouts are essential because they can lower your profits.
• More importantly than size is the mining pool’s overall hashrate, but you can also judge a pool’s legitimacy based on its size.

Can Bitmain Antminer L3+ (600Mh) Mine Bitcoin?

Actually, no, because the miner employs the Scrypt algorithm, which is only appropriate for mining Scrypt-based cryptocurrency. Litecoin (LTC), Dogecoin (DOGE), DigiByte (DGB), Verge (XVG), Gulden (NLG), GameCredits (Game), and Emerald (EMD) are a few of these.

The most well-known Scrypt cryptocurrency mined with the Antminer L3+ (600Mh) is Litecoin.

The United States’ NSA developed the SHA-256 algorithm, which is what Bitcoin uses. The best way to mine this is with a machine using the same algorithm. A lot of processing power is typically needed for bitcoin mining software to be useful and it is also very demanding on the hardware. Because of this, its power requirements are quite high.

Summary: USE BITMAIN ANTMINER L3+ (600Mh) on MINING POOLS

This concludes our investigation into mining pools’ use of Bitmain Antminer L3+ (600Mh) hardware. Other mining equipment may be used with this example of how to set up your AntMiner L3+ (600Mh) or other miners with a mining pool.
For quick connections to mining pools, miners typically provide a web interface.
Our goal is for you to enjoy this tutorial. Please feel free to contact us with any thoughts you may have about your Setup experiences.

We sincerely hope you found this article to be helpful, and we eagerly await your comments and messages. Please comment below with any thoughts you may have if you would!

FAQs