Are you one of the many miners thinking about switching to Antminer L3+ mining because it pays off better than CPU or GPU mining? Knowing how long an Antminer L3+ miner will last can help you understand the value of your investment and the anticipated profitability because Antminer L3+ miners are relatively expensive. Learn about Antminer L3+ mining, potential hazards to your Antminer L3+ equipment, and precautions you can take in this article. We’ll also provide information on the Antminer L3+ miners’ lifespan in order to respond to the query of how long ASIC miners last. So let’s begin!
Table of Contents
How Long Do Antminer L3+ Miners Last?
Application-specific integrated circuits are the most effective and powerful mining hardware we have today.
The popularity of the Antminer L3+ is due to the fact that manufacturers specifically design these machines to mine a particular crypto algorithm.
However, mining is an intensive and competitive process, and as such, it pushes these machines to their maximum capabilities.
The average lifespan of a well-kept, maintained Antminer L3+ can be around 3 to 5 years. Nevertheless, if you keep Antminer L3+ in harsh or poor conditions, they can deteriorate in as little as a few months.
Contrarily, taking good care of an Antminer L3+ miner can prolong their lifespan for more than 5 years.
Your Antminer L3+ Miner’s Worst Enemies
As we’ve already stated, the Antminer L3+ is a very powerful device, but it’s also quite delicate. Numerous external factors could be harmed by unfavorable conditions.
The most common causes for Antminer L3+ damage and deterioration are:
- Little or no airflow: Because miners like the Antminer L3+ generate a lot of heat, it’s critical to keep them cool by using them in a space with good ventilation and air movement.
- Humid, damp, or moist environments: The Antminer L3+’s internal components are susceptible to rust and corrosion due to humidity, just like any other electronic device.
- Extreme temperatures: The lifespan of your hardware may be shortened by extreme heat because it erodes internal hardware components. Cold is typically not as much of a problem because Antminer L3+ emit heat, which can counteract it. Nevertheless, condensation and irreparable damage may result from a sudden rise in temperature from below zero to a comfortable level.
Exposing your mining hardware to environments and conditions that fit these criteria will lead to them underperforming, suffering progressive damage, and even breaking down or burning out.
Requirements for Antminer L3+ Maintenance Platform
1. Small patches, such as chip resistors and capacitors, are soldered using a constant temperature electric soldering iron with a pointed tip (370°C–400°C).
2. During the chip disassembly and welding procedures, a BGA repair station and a mobile desoldering gun are both utilized. If you want to prevent PCB foaming, don’t heat for too long.
3. An APW3/APW3+/APW5 power supply with a 12V output and a 140A maximum current is used to test and measure the hash board.
4. Fluke multimeter, tweezers, and the conditionally configurable oscilloscope V9 test fixture tool
5. After maintenance, the appearance of the board is cleaned with board washing water, to which anhydrous alcohol should be added.
6. When changing a chip, the PIN pins’ surface pads must be cleaned flat, and after tinning, the chip must be soldered using a BGA repair station. Steel sheet for tin tools, solder, and tin tools
7. An antminer thermosetting adhesive is then applied to the chip and heat sink following repairs.
Which Can Cause Damage to Antminer L3+ Machines
The length of time your Antminer L3+ machine lasts largely depends on how well you maintain it. The Antminer L3+ has an average lifespan of three to five years, but with the right maintenance, it can last even longer. Let’s examine some potential threats to the health of your computer.
- High humidity
The internal parts of your Antminer L3+ machine could be harmed in extremely humid or moist environments. Your miner’s delicate core might rust and corrode as a result.
- Poor ventilation or cooling
Antminer L3+ miners generate a lot of heat while they are working. Without sufficient ventilation, it could overheat and damage the machine if left running.
- Extreme temperatures
Extremely hot temperatures caused by either overheating or the environment’s temperature can shorten or destroy an Antminer L3+ machine’s lifespan. Extremely hot temperatures are less dangerous than extreme cold ones because your Antminer L3+’s heating system can balance them out.
- Poor maintenance
Dusty conditions, insufficient airflow or ventilation, extreme temperatures, and shoddy maintenance techniques can all damage your Antminer L3+ miner.
Antminer L3+ Job Requirements
1. Maintenance personnel must be proficient in welding, BGA/QFN/LGA packaging, and have at least a year of maintenance experience. They must also have specialized electronic knowledge.
2. The hash board must successfully pass more than two tests after maintenance.
3. Keep a close eye on the operating instructions when changing the chip. After any accessories were replaced, there is no obvious deformation of the PCB board. Examine the replaced parts and the adjacent components for open and short circuit problems.
4. The maintenance item, relevant test software parameters, and test hardware should all be identified.
5. Verify the tools and test fixture are capable of performing their intended functions.
Best Practices for Preserving Antminer L3+ Miners
Now that we are aware of the elements that harm Antminer L3+ mining equipment, we can consider some suggestions for safeguarding against those hazardous circumstances.
Choosing a Suitable Location for Antminer L3+
The first thing you should consider is the location in which you will run your miner. Remember that Antminer L3+ must be a dry room with good, constant airflow, so wide and open spaces should be the first choice.
If you don’t have access to any places like that, you might want to consider installing additional fans of Use an Antminer L3+ to maintain airflow, prevent condensation, and maintain a dry environment.
Mitigating the Heat
Second, managing the heat produced by the miners is crucial to keeping your Antminer L3+ equipment in good working order.
There are many ways to mitigate the heat from mining hardware. Many mining facilities, especially those where several ASIC miners are situated close to one another, have specialized and modern cooling systems of Antminer L3+ that lower temperature.
Other miners have come up with innovative ways to repurpose the heat produced by Antminer L3+ machines, like heating pools or hot tubs, dehydrating fruit, or redirecting it to greenhouses for growing crops.
These methods not only reduce or even eliminate the damage high temperatures have on miners, but also enable increased profitability either by reducing costs or adding another source of income.
However, remember that the primary priority is treating the excess heat to preserve your miners.
Regular Maintenance and Cleaning to Antminer L3+
It is essential to perform regular maintenance and clean the mining hardware. By removing accumulated dust, the Antminer L3+’s performance is preserved while its lifespan is also increased.
ASICs are very delicate hardware, so you should be extremely careful during the cleaning process. The user manual should contain the manufacturer’s instructions. Pay attention to them closely.
The ASIC fans and interior could be cleaned of dust with the help of an air compressor and blower gun. However, you can also disassemble the miner and brush the fans manually — if you do this, remember to be extra careful!
Conclusion: Take Care of Your Antminer L3+ Mining Equipment
Miners made by Antminer are expensive. The primary factor in any mining operation’s initial investment is the price. Spreading them out over a longer period of time will allow you to spend less money overall.
That said, it is crucial that you can ensure the most favorable conditions possible for your miners. Never undervalue the significance of keeping your Antminer L3+ operational and stored in a space with good airflow, proper ventilation, a controlled temperature, and no humidity.
That’ll do the trick, and along with routine cleaning and maintenance, you’ll be able to use your ASIC miners at their peak efficiency for a number of years.
